STS is an escrow service that protects both buyers and suppliers. Funds are held securely by Made-in-China.com until order terms (e.g., delivery, quality) are fulfilled
|
Still deciding? Get samples of $ !
Request Sample
|
| Customization: | Available |
|---|---|
| Type: | Normal Pressure Transmitter |
| Structure Type: | Strain Gauge Pressure Transmitter |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
Payment Guarantee
Platform-protected payments with refund support for eligible order issues.
Platform Logistics
Inspection Service
After-Sales & Dispute Handling
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1.Reverse polarity protection and instantaneous overcurrent and overvoltage protection meet the requirements of EMI protection;
2.The output signal has various standard specifications, such as: 4-20mA, Rs485 digital signal and 4-20mA of HART protocol, which can be connected to the display meter;
3.Ultra-large range, All-welded stainless steel structure;
| Measuring range | 10-60MPa, More than 60Mpa needs to be customized. |
| Pressure type | Positive pressure(Include gauge pressure and sealing gauge pressure) |
| Accuracy level | ±0.5%FS±025%FS(Test conditions: temperature 20±2ºC; Air pressure:86-106kPa; Humidity:45%RH-75%RH) |
| Operating temperature | -40-80ºC |
| Temperature drift | ≤0.03%FS/ºC |
| Annual stability | ≤0.2%FS/ year typical; ≤0.5%FS/ year maximum |
| Supply voltage | 12-30VDC |
| Current load | < (U-10)/0.02Ω[U: power supply voltage] |
| Output signal | Two-wire 4-20mA; Three-wire 0.5-4.5VDC ,1-5VDC 0-5VDC ;Four-wire Rs485 digital output, etc. |
| Insulation strength | Withstand voltage of 500V without breakdown |
| Insulation resistance | >500MΩ |
| Frequency response | Sensor < 10ms;; Transmitter ≤15ms |
| Life | > 1 million pressure cycles |
| Electrical parameter | HSM connector (wire diameter φ4.5-φ7mm) or cable lm |
| Applicable medium | solid that do not react chemically with structural materials (probe materials, sealing materials) |
| Probe base material | Stainless steel etc |
| Probe seal material | All-welded structure without sealing material |
| Protection level | IP65 IP67 IP68 |
| Weight | About 150g-10kg[ different due to different subtypes of application] |
| Atmospheric pressure | 60-110KPa;ambient humidity: ≤95%RH;Storage temperature: -40-120ºC |
| Vibration | Under the condition of 10gRMS and 20-2000 Hz, the change is less than 0.5%FS |
| Shock | 100g, and the change after 10ms impact is less than 0.5%FS (only for general-purpose effective general-purpose models, the maximum allowable impact is 120g) |
| Interfererce | Under the interference of 10-300MHZ and field strength of 10V/m, the error is less than 0.5%FS |
){kind=link}